Bath fitting
SanTec OCEAN B7
23
EN
OCEAN B7
A
Carefully remove the front plate using a screwdriver
(click-lock system).
B
Unscrew the mounting clip using a screwdriver.
C
Flip the mounting clip 180°.
D
Feed the screw into the rear opening.
E
The mounting clip’s nose points downwards –
adjust 1 mm downwards
– fasten the mounting clip
again until it aligns with the tiles.
F
The mounting clip’s nose points upwards –
adjust 1 mm
upwards
– fasten the mounting clip again until it aligns
with the tiles.
Bringing the front plate into a level position.
B
C
D
E
F
A
Mounting clip:
Can be turned into any
direction and then
inserted into the guide rail
.
i
Nose points
upwards
Nose in centre
position
Nose points
downwards
Nose in centre
position
