WimTec OCEAN U4 121 131, Assembly And Operating Instructions Manual

Page: 12 / 24

12 Urinal flush valve WimTec OCEAN U4
EN
OCEAN U4
General notes
Congratulations on purchasing WimTec
OCEAN U4, your electronic urinal flush valve.
Please take note of the following cleaning
and maintenance recommendations in order
to ensure that you will be able to enjoy this
high-quality fitting for many years:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or
cloth only
Do not use steam cleaners
This manual is valid for the following
products:
WimTec OCEAN U4 230 V 9 V
Black glass , Art. no. 121 087 121 124
White glass , Art. no. 121 094 121 131
Delivery scope:
Safety glass front plate with integrated
electronics, battery module incl. battery or
WimTec power supply, mounting frame,
magnetic valve and mounting material.
Important installation notes:
Mounting and installation may only be
performed by a qualified service provider in
accordance with DIN 1988, ÖVE/ÖNORM
E 8001 and VDE 0100 Part 701.
Wire the mains cable via a 2-pin main switch
with a contact spacing of at least 3 mm and
ensure the fuse employed blows at max. 6 A!
When planning and installing sanitary facilities,
all relevant local, national and international
standards and provisions must be observed.
The “General installation terms and
conditions” provided at www.wimtec.com
apply.