30 Washbasin fitting
WimTec ECOSAN W6
EN
ECOSAN W6
4
3
5
2
1
Function settings on the electronics module
1.
Loosen locking screw on the underside of the sensor hood
using the Allen key (size 2) provided (3 rotations)�
2.
Rotate hood anticlockwise and remove to the side�
3.
Remove the electronics module from the sensor hood and
make the desired settings (see page 27)�
4.
Insert the electronics module into the sensor hood�
Position sensor hood (sensor window gently tilted
upwards) and rotate clockwise until the stop�
5.
Then tighten the locking screw by hand�
1
1
2
2
Note:
If adjustments are made to the
electronic module after initial
start-up, it is recommended
to activate the cleaning stop
beforehand (see page 34)�
!
Summary of Contents for ECOSAN W6
Page 1: ...ECOSAN W6 DE Montage und Bedienungsanleitung Assembly and operating instructions EN ...
Page 42: ......
Page 43: ......
