6
S7
flush-mount set
EN
OCEAN S7 flush-mount set
Specifications
Operating voltage:
via power supply 230 V 50 Hz / 12 V=
Art.No. 117 899 - power supply for one
control unit
Art.No. 113 792 - power supply for up to
5 control units
Power consumption: max. 3.5 W
Flow rate:
0,05 - 0,6 MPa (0,5 - 6 bar)
Flow rate:
max. 22 l/min at 0,3 MPa (3 bar)
Static pressure:
max. 0,8 MPa (8 bar)
Water temperature: max. 70 °C (max. 80 °C for max. 10 min)
Water inlet:
R 1/2“ IG
Water outlet shower: R 1/2“ IT
Noise class:
I
Flush-mount set:
W/H/D: 140 x 169 x 95 - 120 mm
This manual is valid for the following products:
Art.No. 118 926
SanTec S7 flush-mount set
Art.No. 118 933
SanTec S7 flush-mount set with thermal
disinfection
Delivery scope:
Wall box with 2 shut-off valves and integrated dirt filters, thermostat
mixer, 2 magnetic valves (3 magnetic valves for thermal disinfec-
tion), sealing frames and cover plate.
Important installation notes:
Provide for a flush-mount box for an optional power supply outside
of the protected zone. Mounting and installation may only be per-
formed by a qualified service provider in accordance with DIN 1988,
ÖVE/ÖNORM E8001 and VDE 0100 Part 701. When planning and
installing sanitary facilities, all relevant local, national and inter-
national standards and provisions must be observed!
According to the Austrian ÖNORM B 5019, thermal disinfection requires
a minimum temperature of 60 °C for at least 10 min at the relevant
system locations. The operator must ensure that all parts of the
installation (e.g., piping) can withstand the temperatures applied
during thermal disinfection.
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!
