© by WilTec Wildanger Technik GmbH
Item 52022
Page 3
09 2021-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety guidelines
Beware
•
The use of this device is only allowed in standing water bodies, garden ponds or swimming
ponds and their surrounding areas with a fault current protection-switch with a triggering nominal
current up to 30 mA (according to VDE 0100 Article 702 and 738).
•
The device is not suitable for use in swimming pools, paddling pools and other water bodies,
where people might be during operation. Operating the device while people are within the dan-
ger zone is not allowed. Ask your electrician!
•
The device is not intended for use by people (including children) with impaired or limited physi-
cal, sensory and mental abilities or lack of experience and/or knowledge, unless they are su-
pervised by a person responsible for their safety or follow the instructions stated by this person
on how to use the device correctly.
•
Children should be supervised to make sure that they do not play with the device.
Attention!
•
Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Use the device exclusively according to the intended purpose stated in these instructions.
•
You are responsible for the safety of the working environment.
•
If the cable or the plug is damaged due to external influences the cable must not be repaired! It
has to be replaced with a new one. This work may only be carried out by an electrician.
•
The voltage indicated on the type label of the device of 230 V AC has to correspond to the
existent mains voltage.
•
Never lift, carry, or fix the device by its power cable.
•
Make sure that the electrical plug connection is protected from flood and moisture.
•
Before working on the pond pump, disconnect the appliance by taking the plug out of the socket.
•
Avoid exposing the appliance to a direct water jet or rain.
•
The user is responsible for the compliance with local specific safety and installing regulations.
(Ask an electrician.)
•
Damage arising from flooded rooms caused by dysfunctions of the appliance must be avoided
by means of the appropriate measures (e.g., by installing an alarm system, a reserve pump).
•
In case of malfunction, the repair work can only be carried out by a qualified electrician.
•
The appliance must not run dry or with a completely closed intake line. The manufacturer’s
warranty is no longer valid if the damage is caused by dry running.
•
The appliance must not be used for swimming pools.
•
The device cannot be employed for potable water circuits.
Note!
In the event of an overload (e.g., if the impeller jams), the internal thermal protection automatically
switches off the pump. After disconnecting and reconnecting the power supply, the pump can be re-
started.
Warning!
Read all safety notes and the instructions thoroughly. Non-compliance with the safety rules
and regulations can lead to an electric shock, fire and/ or serious injury. Keep the instructions and the
safety notes in a safe place for future reference.
