WilTec 90701A++, User Manual

Page: 10 / 20

© by WilTec Wildanger Technik GmbH Item + Page 10
http://www.WilTec.de
http://www.aoyue.eu 05 2022-1
http://www.teichtip.de
Basics
1. Humidify the filter pads before use to allow them to be very efficient. It is recommended to
regularly re-humidify the pads.
2. Clean the filter spring and exchange the filters when they are dirty.
3. The solder channel inside the gun can be cleaned with the help of the cleaning needle if neces-
sary.
№ Name № Name
1 Filter tube cap 6 Body of unsoldering
2 Filter spring 7 Heating element
3 Filter tube 8 Nozzle
4 Filter pad 9 Heating element casing
5 Filter holder 10 Safety cap
Maintaining the unsoldering gun
1. Checking and cleaning the unsoldering gun in case of an obstruction
a) Plug in the power plug of the station, turn on the unsoldering function of the station, and
wait for the nozzle to heat up.
b) Wait until the nozzle has heated up completely before beginning cleaning.
c) Clean the nozzle opening with the help of the cleaning needle.
d) In case the cleaning needle does not penetrate the opening, instead use the cleaning drill.