Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
Carefully read this manual before use and keep it for future reference.
Check your local mains voltage; it must match that given on the nameplate.
Do not operate the device if the power cord or plug is damaged or if the device is malfunction-
ing, has been dropped or damaged in any way. Have repairs carried out by qualified person-
nel only.
Avoid contact with the hot surfaces. Risk of burns !
To protect yourself against electric shock, do not immerse cables, plugs or housings in water
or other liquids.
Unplug the device from the power outlet when not in use or when being cleaned or serviced.
Keep the power cord away from sharp edges (e. g. table edges) or hot surfaces.
The use of accessories not recommended by the manufacturer can lead to injuries.
Do not place the device on or near a hot gas or electric burner or in a hot oven.
Close supervision is required when this device is used near children. Make sure that the
power cord does not hang over the work surface.
Do not use the device outdoors or in a damp environment.
Do not use the device for any other purpose than that for which it was intended. No responsib-
ility is accepted for damage caused by improper use.
Always place the device on a level and stable surface.
This device may only be used by persons (including children) with limited physical, sensory or
mental capabilities or a lack of experience or knowledge if they have been introduced to the
use of the device by a person familiar with it and responsible for them and are supervised by
him or her.
© by WilTec Wildanger Technik GmbH
Item 62871
Page 3
http://www.WilTec.de
http://www.aoyue.eu
05 2021
-1