WilTec 62555, Operation Manual, Page: 8 / 9

© by WilTec Wildanger Technik GmbH Item 62555 Page 8
http://www.WilTec.de
http://www.aoyue.eu 08 2021 -1
http://www.teichtip.de
№ Name № Name № Name
1 Brush carrier 30 O-ring 59 Spring washer
2 Carbon brush 31 Front cover 60 Distance ring
3 Brush holder 32 Aluminium housing 61 Holder
4 Rear cover 33
⌀
5 steel ball 62 Key
5 Housing 34 Wheel button 63 Centrifugal axis
6 Left handle 35 Spring 64 Gear box
7 Bushing 36 Keep ring 65 Cover
8 Capacitor 37 Outer sleeve 66 O-ring
9 Cable guard 38 Screw cap 67 O-ring
10 Flange 39 O-ring 68 Sliding needle bearing
11 Right handle 40 Washer 69 Piston rod
12 Switch 41 Bearing 70 Piston pin
13 Speed control switch 42 Distance ring 71 Piston
14 Bearing 43 Distance bushing 72 O-ring
15 Stator 44 Bearing cap 73 Cone gear
16 Deflector 45 Conic gear drive 74 Clutch
17 Armature 46 Rubber seal 75 Spring
18 Bearing 47 Holder 76 Impact body
19 Middle cover 48 Washer 77 Flat key
20 Distance ring 49 Washer 78 Cylinder
21 Lower wheel button 50 Friction sheet 79 Steel bal
22 Spring 51 Gear 2 80 O-ring
23
⌀
7 steel ball 52 Spring washer 81 Square-head bolt
24 Mallet 53 Ball bolt 82 Hoop
25 O-ring 54 Holder 83 Handle support
26 O-ring 55 Sliding needle bearing 84 Auxiliary handle
27 Spin sleeve 56 Washer 85 Dust protection
28 D-shaped rubber seal 57 Small armature 86 Toolbox
29 Spring 58 Gear