background image

Personal safety

Stay vigilant! Pay full attention to what you are doing and always use electric devices
responsibly and carefully. Do not use them when tired or under the influence of alco-
hol, drugs or medicines.

 A moment of inattention during use can result in personal injury.

Dress appropriately – do not wear loose clothing or jewellery. Tie long hair together
and keep hair, clothing, and gloves away from moving parts. 

Loose clothing, jewellery or

long hair increase the risk of injury, as they can get caught in moving parts.

Avoid unintentional switching on of electric devices. Make sure that the device switch
is off before connecting the device to the mains. 

Do not carry the device with your finger

on the on/off switch.

Do not lean too far. Make sure you have a firm stance and keep your balance.

 A secure

stance enables better control of the electric device in an unexpected situation.

Put on safety equipment.

  Wear protective goggles, a respirator, work gloves, and non-slip

safety shoes while working with the device.

If devices are provided for connecting dust extraction systems, ensure that they are
connected and used correctly.  

The use of dust collection can reduce the hazards arising

from dust.

Using an electric device and caring for it

Do   not   use   force   on   the   electric   device.   Always   use   the   right   attachment   for   your
device.

 With a suitable attachment, the device works more effectively and safely, as it was de-

signed for the respective task.

Do not use the electric appliance if the switch does not turn on and off.  

An electric

device impossible to be operated at the switch is dangerous and must therefore be repaired
immediately.

Pull   the   power   plug   before   making   changes,   replacing   accessories   or   storing   the
device. 

This precautionary measure reduces the risk of the device starting up unintentionally.

Store an electric device out of the reach of children when not in use. Do not allow the
device to be operated by persons unfamiliar with its use or these instructions. 

An elec-

tric device in the hands of inexperienced users can be dangerous.

Maintain   the   electric   device   regularly.   Check   for   improper  assembly   or  blockage   of
moving  parts,  defects,  damage,  and  any  other  condition  that could  limit  the  proper
functioning of the device. 

If the device is damaged, have it repaired before use. Many acci-

dents are due to poor maintenance.

Use an electric device and its accessories in accordance with these instructions, taking
into account the working conditions and the work to be performed. 

Improper use of the

electric device can lead to dangerous situations.

Safety of maintenance

Have your power tool serviced by a qualified specialist only with identical spare parts. 

This en-

sures that the safety of the power tool is guaranteed.

Safety instructions concerning saws

Cutting

Danger!

  Keep your hands away from the cutting area and the saw blade. Keep your

second hand on the auxiliary handle or the motor housing. 

With both hands holding the

saw, there is no risk of cutting yourself with the saw blade.

Do not reach under the workpiece,

 as the saw blade comes out there, and you could reach

into it.

Adjust the cutting depth to the thickness of the workpiece. 

No more than one tooth of the

saw blade should emerge below the workpiece.

© by WilTec Wildanger Technik GmbH 

Item 62554

Page 6

http://www.WilTec.de
http://www.aoyue.eu  

  

04 2021

-1

http://www.teichtip.de

Summary of Contents for 62554














Reviews: