WilTec 62534, Operation Manual, Page: 4 / 6

© by WilTec Wildanger Technik GmbH Item 62534 Page 4
http://www.WilTec.de
http://www.aoyue.eu 12 2021 -1
http://www.teichtip.de
Figure 1: Parts of pipe bender and their names
№ Name № Name
1 Pressing piece 6 Fixing rail
2 Toolbox 7 Wing screw
3 Lever 8 Pin shaft
4 Tension spring 9 Winged nut
5 Handle 10 Modules
1. With the help of the pin shaft and the winged nut, mount two modules onto the fixing rail that
has two mounting positions. If you use a type-1014, -1216, -1418, and -1620 pipe, install the mod-
ules in pos. 1 as shown in Fig.
2a. If you use a type-2025 and -2623 pipe, install the modules in
pos. 2 as shown in Fig. 2b.
Position 1 Position 2
Figure 2a Figure 2b
2. Fix the fixing rail into the notch with the help of the winged screw as shown in Fig. 3.