ated) metal sheets or other roof claddings, the panel is to be mounted to the roof directly without
mounting panels. The static of the building also needs to be checked in this case.
Roof mounting
When mounting the solar panel to a roof, it is important to always regard the static of the individual
building and to ensure that the solar panel cannot loosen itself from the roof with strong winds, snow-
fall or stormy weather. When mounting the solar pane, allow a gap between the roof top and the back
side of the unit of at least 10 cm for the parts to be able to cool down.
To guarantee a proper installation of the unit, the frame needs to be attached to the roof securely. The
anchor points should be sealed, hindering any humidity from getting into the roof and thus inside the
house. Installing the solar panel on the roof can influence the flame retardance.
Technical data
Model type
Mono 165 W
Mono 150 W
Mono 130 W
Mono 100 W
Mono 50 W
Item number
62394
62393
62392
61993
62391
Max. power P
max
(W)
165 ± 3%
150 ± 3%
130 ± 3%
100 ± 3%
50 ± 3%
Max. operating voltage
V
mp
(V)
18.92
17.42
18.49
17.6
17.55
Max. operating current I
mp
(A)
8.72
8.61
7.03
5.68
2.85
Off-load voltage V
oc
(V)
23.14
21.3
22.69
21.59
21.58
Short circuit current I
sc
(A)
9.12
9.15
7.48
6.17
3.24
Max. nominal system
voltage
(V)
1000
Max. string fuse
(A)
13
8
5
Test condition standard
E = 100
W
/
m²
Tc = 25
AM 1.5
℃
Application class
A
Protection class
IP 65
Overall dimensions
(mm)
1480×680×35
1290×675×35
900×670
540×670×35
Cable length
(cm)
90
Maintenance
To allow an ideal operation and maximal energy production, the glass cover needs to cleaned
from dust and dirt regularly. Only use clear water and no chemical cleaning detergents. Re-
move persistent pollutants with the help of a soft sponge or with a cloth. Make sure not to ap -
ply to much pressure on the glass cover and do not touch the unit without wearing insulated
protective gloves.
Remove snow before the additional weight could damage the solar panel.
Examine the solar panel including its attachments and cables regularly for signs of rust or
damages and if parts are damaged or worn, have them repaired immediately by a qualified
specialist.
© by WilTec Wildanger Technik GmbH
Item 62391–62394, 61993
Page 7
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1
