Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety precautions
Caution:
The use of this product entails the risk of severe scalding due to the high temperatures of the
emitted vapour (approx. 100
). You should therefore make sure to understand and follow the secur
℃
-
ity instructions below in order to minimise the risk of accidents. Infringement may lead to severe injur-
ies as well as damage to the device and its surroundings.
When using the device, always wear work gloves and, if necessary, use additional protective
clothing appropriate for the job (protective goggles, breathing mask, etc.) in order to minimize
the risk of injury.
Never point the steam plate at other people, animals or objects that are sensitive to heat.
Do not place any heavy objects on the device and make sure that the hose is not knotted or
pinched.
Be aware that the hot steam heats other materials in the vicinity and contact with them can
also lead to injuries.
Disconnect the device from the power supply when not in use and before filling, emptying and
performing any maintenance work.
Always make sure that the main unit is on the floor or other stable, level surface from which it
cannot fall.
Do not use the device if the water level is below the marking for the minimum fill level of the
water tank.
Do not pull, hold or carry the device by the cable or hose and keep both away from sources of
heat and sharp edges.
Do not use the device if the cable is damaged and do not try to repair it yourself. In such a
case, the cable must be replaced before the device can be used again.
Before working with the steam wallpaper stripper, make sure that switches and sockets in the
work area have been adequately masked and make sure that no water vapour gets on them
during work, as this can lead to short circuits.
Keep your work area clean and make sure it is adequately lit. Untidy and poorly lit workplaces
increase the risk of accidents considerably.
Do not overestimate yourself, do not take unnecessary risks, and make sure that you have a
safe footing at all times.
Do not allow yourself to be distracted while using the device and do not use the device if you
are tired, ill, or under the influence of alcohol, drugs, or medication.
After switching off the device, allow it to cool down for at least 30 min before putting it away
and only store it in a dry environment and not in the immediate vicinity of heat sources or eas-
ily flammable materials.
Never use the device near easily flammable or explosive materials or in poorly ventilated
rooms.
Protect yourself against current discharges by avoiding contact with metallic or electrical ob-
jects.
Never leave the device unattended during use and always keep it out of the reach of children
and animals.
Keep other people away from your work area as they may distract you, which increases the
risk of accidents.
This device is a DIY product; so it is not suitable for industrial use. Plan and take sufficient
breaks when working for longer periods in order to avoid overstressing the device and avoid
damage.
Do not disassemble the device; only have repairs carried out by trained personnel.
© by WilTec Wildanger Technik GmbH
Item 62283
Page 3
http://www.WilTec.de
http://www.aoyue.eu
03 2021
-1