© by WilTec Wildanger Technik GmbH
Item 61897, 61898
Seite 3
05 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
CAUTION:
•
Perform a visual inspection of the device before each use. Do not use the unit if safety devices
are damaged or worn out. Never disable safety devices.
•
Only use the device for the purpose specified in these instructions.
•
You are responsible for the safety in your work area.
•
Never repair the cable in case it and/or its plug are damaged and do not use the device. The
cable has to be replaced with a new one.
•
The voltage of 230 V AC specified on the type plate of the device must correspond to the exist-
ing mains voltage.
•
Never lift, transport or attach the device to the mains cable.
•
Make sure that the electrical plug connections are protected from flood and moisture.
•
Always disconnect the power plug before performing maintenance or any other work on the unit.
•
Avoid exposing the device to a direct jet of water.
•
The operator is responsible for compliance with local safety and installation regulations. Ask a
qualified electrician if necessary.
•
If the device should fail, repair work may only be carried out by a qualified electrician.
•
Make sure that there is no one inside the room while the device is in operation. Ventilate the
room after the set time has elapsed.
WARNING:
•
This air unit is not a medical device. Do not terminate or change any medical therapy or medi-
cation without the advice of your physician. Excessive ozone concentrations can cause mucous
membrane or respiratory irritation.
•
Read all safety instructions. Failure to follow the safety precautions and instructions may result
in electric shock, fire, and/or serious injury.
•
Ensure that there are no individuals in the room while the unit is in operation. Ventilate the room
after the set time has elapsed.
•
Keep all safety this manual and instructions for future reference.
Electrical Connection
The electrical connection is made via a 230 V ~ 50 Hz socket outlet with earthing contact. Fuse protec-
tion at least 10 A.