© by WilTec Wildanger Technik GmbH
Item 60386
Page 5
05 2021
-1
The following instructions for use are recommended for you to observe in order to prevent dam-
age to property and personal injury. Never use the balancer together with a load carrier with a
maximum load capacity of less than 1 t!
ALWAYS observe:
1. Know about the application monitoring,
operation, and warning notices.
2. Provide the firmness and protection of all
connection beams.
3. Ensure the unobstructedness of the load.
4. Check the balance of the load after a few
centimetres.
5. Avoid swaying of the load.
6. Remove all persons out of the immediate
vicinity of the load.
7. Warn people present about the lifted
load.
8. Protect the loading chains from welding
spatter or other harmful objects.
9. Immediately notify the supervisor/work-
shop in the event of an unforeseen event
or if damage is discovered.
10. Regularly inspect the iron carriers, re-
place damaged parts, write down all
maintenance measures carried out.
Observe:
1. Respect the maximum load capacity.
2. Do not use the balancer if it is damaged
or not ready for use.
3. Do not use the balancer if iron carriers
are deformed, damaged or worn out.
4. Only lift the load if no obstacle can hinder
the lifting.
5. Concentrate, do not allow any distraction.
6. Do not use the balancer to lift, support, or
transport people.
7.
DO NOT LIFT LOADS ABOVE PER-
SONS!
8. Keep eye contact with the load lifted.
9. Avoid any contact of the balancer and an-
other object.
10. Do not use the device or its chains as
welding surface.
11. Prevent any contact of the balancer and
a welding electrode.
12. Do not try to extend or repair the device.