© by WilTec Wildanger Technik GmbH
Item 60386
Page 3
05 2021
-1
Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Description
Balancers are used as accessories for workshop cranes, rope hoists, or chain hoists and help with the
exact positioning or alignment of loads, e. g. motors.
The risk of tilting during installation and removal is kept as low as possible and allows safe and easy
work. Thanks to a worm drive provided with a hand crank, including 4 chains with safety hooks, the
balancer can be adjusted lengthwise.
The 900 kg balancer is placed between a pulley block and an unwieldy, heavy load, e. g. a complete
car engine with gearbox. The device is designed in such a way that it lifts the object to be lifted as
efficiently as possible and at the same time gives the user the opportunity to turn and position the object.
•
chain length with hook: approx. 340 mm
•
maximum load capacity: approx. 900 kg
•
screw width: approx. 460 mm
•
total width: approx. 400 mm
•
weight: approx. 7 kg
Safety instructions and warnings
•
Familiarize yourself with the monitoring and operation of the application and with the warning
notices.
•
Make sure to be familiar with the contents of the instructions for use.
•
This device is not intended to be used by persons (or children) with reduced physical, sensory
or mental capabilities or persons who do not have the appropriate experience or knowledge,
unless a person responsible for their safety supervises them or previously has given them in-
structions on how to use the device.
•
Children must be supervised to ensure that they do not play with the device.
•
Make sure that the load is free and that there are no obstacles that can make lifting difficult.
•
Make sure that nobody approaches the load.
•
Warn anyone present about the raised load.
•
Immediately notify your supervisor or workshop if something unforeseen happens.
•
Never lift more load than the maximum allowed.
•
Never use damaged, malfunctioning engine lifts.
•
Never use deformed, damaged, or worn-out lifting accessories.
•
Never lift the load if an obstacle could interfere with the lifting.
•
Stay focused and do not allow any distractions during the process.
•
Never use the load handler to lift, support, or transport people.
•
NEVER LIFT LOADS OVER PERSONS!
•
Unsecured loads can cause limb or bone injuries and even death.