© by WilTec Wildanger Technik GmbH
Item 50799
Page 3
02 2022
-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety Instructions/warnings
•
The user must have read and understood the operation manual before using the device. All
warnings need to be understood and complied with. People unfamiliar with the operating manual
or according warnings need to be instructed accordingly.
•
Keep this manual, all safety notes, and warnings in a secure, dry place, where it is always
available.
•
Check the device before using it to ensure that it is complete, operational, and tight.
•
Never operate a damaged or dysfunctional device. In case of damage, contact the manufacturer
or a qualified specialist.
•
Keep the device away from humidity or rain.
•
The jack lift should always be operated by two people, especially when lifting or lowering vehi-
cles or weights.
•
Never leave the engine of the vehicle switched on whilst being lifted.
•
Nobody is allowed to sit on/inside the vehicle being lifted.
•
The jack lift may only be placed on an even and solid surface which can carry the jack weight
including that of the vehicle.
•
Do not alter the device in any way.
•
Before every use, ensure that all screws and nuts are tightened.
•
After transporting the jack lift, the air needs to be expelled from the hydraulic parts.
•
When using the device, always wear adequate protective clothes such as protective gloves,
working shoes, and hearing protection.
•
Do not wear any loose clothing or jewellery (necklaces, rings, etc.). Long hair needs to be tied
together.
•
Always use a suitable hydraulic oil for refills. Never mix hydraulic oils together.
•
Have repairs carried out by specialists only.
•
Ensure that no people or items are beneath the device when lowering it.
•
Use the jack lift only for its intended purpose.
•
Never exceed the maximum load capacity.
•
Centre the weight on the jack lift and fasten it with suitable lashing straps. Before lifting any
object, the jack needs to be on its lowest setting.
•
After raising the object, make sure that the locking bar tip is in place behind a frame notch.
•
Always work cautiously and carefully.
•
Keep your working area well illuminated and tidy. An untidy and badly illuminated workspace
can lead to accidents.
Control/inspection
The device should be visually checked before every use so that the user can exchange damaged, bro-
ken, or missing parts on time. The device needs to be checked immediately by a specialist in case any
unforeseen fault occurs. If one of the strap chains seems to be damaged,
the device needs to be taken