The error can be rectified quickly, which does not affect the warranty. To do so, proceed as follows:
1. Disconnect the lifting unit from the power supply (pull the plug).
2. Loosen the two macerator cover screws (narrow sides) and remove the cover.
3. Empty the small transparent hose that connects the large container with the small black con-
trol box. Also dry out the pressure switch in the small black box (on the heater or in the sun).
4. After drying, reassemble the system in reverse order.
5. Put the macerator back into operation; if the pressure switch is not defective, the system will
run again without errors.
Cleaning the device
The toilet pump macerator must be cleaned from the outside
only
with mild cleaning agents like damp
cloth and soapy water. Damage caused by inappropriate cleaning agents does not fall under warranty.
© by WilTec Wildanger Technik GmbH
Item 50741
Page 11
http://www.WilTec.de
http://www.aoyue.eu
11 2020
-1
