© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
Seite 4
6. The switch to (3) turn your UV and indicator on and off is located
in the side of the filter head. Please check the UV regulary when
cleaning your filter to make sure it is in full working order.
5. According to the diagramm then
press down the blue primerbutton on
top of the filter head this will prime the
filter drawing water in through the
hose. Repeat this if necessary until all
pipework is full with water.
4. According to the diagramm then at-
tach the input downpipes and output
spraybars.