Wilson Sporting Goods, Inc.
1. Using hardware found in
package labeled assembly
“E”, attach top of height
adjustment assembly to lower
arm as shown.
2. Make sure plastic washers
are placed against all
painted surfaces to guard
against corrosion and aid in
movement of arm.
3. Finger tighten bolts.
X 2
X 2
X 2
X 1
X 2
X 2
Pivot Bar “E”
Nylon
Steel
1. Using height adjustment
crank, align holes at bottom of
height adjustment assembly
with holes of triangular
fl anges.
2. Apply hardware in order
shown. Make sure plastic
washers are placed against
all painted surfaces to guard
against corrosion and aid in
movement of arm.
3. Repeat on opposite side.
4. Finger tighten bolts.
23
24
13
X 2
X 2
X 2
X 4
Hardware Assembly “E”
E
