Wilson Electronics Sophia Series 2, Owner'S Manual, Page: 40 / 66

S
o p h i a
S
e r i e S
2 o
w n e r
’
S
M
a n u a l
40
W i l s o n A u d i o S p e c i a l t i e s
in your listening room, we have applied a removable layer of protective film over the
finish. We recommend that this film be left in place until the speakers are in their final
location in your listening room. Once you have determined their final position, re-
move the film by following this procedure:
1. Ensure the speaker surface is room temperature before removing the pro-
tective film. Removing the protective film when the speaker surface is
cold can damage the paint surface.
2. Slowly remove the film from the top down, large sections at a time, gen-
tly pulling the film downward and outward. Tearing the film aggressively
can damage the paint.
3. Take care in removing the protective film near edges and corners to pre-
vent paint damage in these areas.
4. The protective film should not be left on the painted surface for extended
periods of time nor exposed to heat sources and direct sunlight.
40
W i l s o n A u d i o S p e c i a l t i e s