Wilson Electronics Sophia Series 2, Owner'S Manual

Page: 37 / 66

37
W i l s o n A u d i o S p e c i a l t i e s
S
e C T i o n
4 – f
i n a l
S
e T u p
37 37
W i l s o n A u d i o S p e c i a l t i e s
Note: Before setting up the Sophia Series 2, study carefully Section 2, “In Your
Room.” It provides valuable information on determining the ideal room location for
your speakers.
Section 4.1 – Final Setup
Preparation
You will need the following items:
• Supplied hardware kit
• Tape measure
• Known listening position
Your dealer is trained in the art and science of the Wilson Audio Setup Procedure
(WASP) outlined in Section 2. Before the spike/diode assemblies are attached to the
bottom of your Sophias, the set up and fine tuning of your loudspeaker should be com-
pleted. Before spiking your Sophias, use masking tape to carefully mark their location.
Section 4.2 - Sophia Spikes
The Sophia comes with a set of heavy duty spikes. These spikes also provide a
secure mechanical reference point as well as optimal height placement for the Sophia.
Brass disks that fit beneath the spikes are also included for installations where spikes
might damage the floor surface (such as wood floors).
After determining the Sophia position, assemble the spikes as follows:
Assembly
1. Insert threaded set screws into the bolt holes located on the bottom of
your Sophia with the Allen head facing out.
f
igure
5 - W
ilSon
c
ontroller
f
ront
p
anel