Wilson Electronics SIGNALBOOST MINI-AMP Installation Manual Download Page 8

7

The Ultra-slim antenna must be placed on or 
near the cellular data card to work properly.  
Attach the Ultra-slim antenna to the laptop 
or cellular data card with the VELCRO

®

 

included in the package.  

IMPORTANT:

 

The adhesive of the gray Velcro patch that 
adheres to the laptop or cellular data card 
needs time to “cure.”  For best results, do not 
use the Velcro connection for a minimum of 
24 hours after application.
The Ultra-slim antenna included in the 
package is long enough to reach the 
ampli

fi

 er location.  This allows for ease and 

convenience of use.
To maximize performance, attach the Ultra-
slim antenna as close as possible to the 
original antenna on your laptop or cellular 
data card. 
If you have questions as to the placement of 
the Ultra-slim antenna, call Wilson Technical 
Support at 866-294-1660 or visit
www.wilsonelectronics.com.

Ampli

fi

 er

Ultra-slim

Antenna

Attaching a Wilson Ultra-slim Inside Antenna to a Laptop or a Cellular Data Card

Laptop or Data Card

 

On cellular data card

On laptop

Optional Cell Phone Cradle Plus

 

As an alternative to the Ultra-slim antenna, 
Wilson offers the Cell Phone Cradle Plus, a 
high-quality phone cradle with a built-in inside 
antenna. The Cradle Plus accommodates 
any cell phone or wireless-capable PDA and 
supports any hands-free device including 
earbuds and Bluetooth products. 
Like the Ultra-slim antenna, the Cradle Plus 
communicates with multiple cell phones 
and data cards in the vehicle. The cable 
from the Cell Phone Plus attaches to the 
“Inside Antenna” connector on the ampli

fi

 er.

Amplifier Instructions - SBoostMSec1:7   Sec1:7

Amplifier Instructions - SBoostMSec1:7   Sec1:7

4/2/2008   9:16:56 AM

4/2/2008   9:16:56 AM

Summary of Contents for SIGNALBOOST MINI-AMP













Reviews: