4
Installing a Wilson Outside Antenna
To receive the best cell signal, select a location in the center of the vehicle’s roof 12 inches
away from any other antennas and free of obstructions.
Follow the speci
fi
c antenna installation instructions included with the outside antenna (sold
separately).
The outside antenna must be installed
vertically. Signal performance will be
degraded if the antenna is not vertical.
The antenna cable may be run through the
door to the ampli
fi
er.
The antenna cable is small enough to easily
tuck under the door seal or plastic molding.
For a more professional-looking installation,
the antenna cable may be run under the
door seal. Carefully pull down the door
seal. Run the cable through the seal
and push the seal back into place. This
prevents constant wear and tear on the
cable as the door opens and closes.
Warning:
Do not use any type of glass-
mount antenna with this ampli
fi
er. The outside
and inside antennas must be shielded from
each other to prevent oscillation.
!
Optional Magnet-
Mount Antenna
Shown
Carefully
Pull Down
Door Seal
Run Cable
Under
Seal
Tuck Cable
Under Seal
Warning:
The outside antenna must
have a separation of at least 10 inches from all
persons during normal operation.
!
Amplifier Instructions - SBoostMSec1:4 Sec1:4
Amplifier Instructions - SBoostMSec1:4 Sec1:4
4/2/2008 9:16:51 AM
4/2/2008 9:16:51 AM
