iDEN 800 MHz Specifications
iDEN 800 MHz Specifications
Model Number
274080
Antenna connectors
N-Female
Antenna impedance
50 Ohms
Dimensions
5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm)
Weight
1.27 lbs (0.544 kg)
Frequency
806-821 MHz / 851-866 MHz
1
Passband Gain (nominal)
70 dB Typical,
75 dB Maximum
2
Power Output
806-824 MHz
Power output for single cell phone (uplink)
34.0 dBm
Power output for single received channel (downlink)
26.0 dBm
Noise Figure (typical downlink/uplink)
3.5 dB nominal / 5 dB nominal
Isolation
> 90 dB
Power Requirements
100-240 V AC, 50-60 Hz, 21 W
Notes:
1. Nominal gain is the maximum gain at any frequency in the passband.
2. The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations
when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially
where the output signal is re-radiated and can cause interference to adjacent band users. This power
reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the
device.
3301 East Deseret Drive, St. George, UT 84790
For additional Technical Support visit www.WilsonElectronics.com
or email at: [email protected]
Phone: 866-294-1660 Local: 435-673-5021 Fax: 435-656-2432
www.twitter.com/WilsonCellular www.facebook.com/WilsonCellular
AIG #110995_iDEN800MHz_Rev2_11.22.11
