background image

8

Need help?

www.WilsonElectronics.com

Tech Support  866-294-1660

Mon.- Fri. Hours: 7 am to 6 pm MST

a)  Turn away Outside Antenna from the 

cell tower until lights no longer flash. 

Contact Wilson Electronics Technical 

Support Team for assistance.

Fixing Blinking Red Light Issues 

If one or more of the lights on Signal 

Booster are blinking red, this means that 

the Signal Booster has shutoff. 
a)  Increase the distance between 

the cellular device and the Inside 

Antenna.

 

Increase the distance

Lights Off 

If one or more of the lights on Signal 

Booster are off verify power to your surge 

protected power strip. If power and lights 

are still off this means that the gain has 

been turned all the way down and the 

band is in Power Save Mode. Increase 

the gain until the light turns on. If there are 

bands that are not being used in the local 

coverage area, we recommend turning 

these frequencies off. This will reduce 

enegy consumption.

  

NOTE: The Signal Booster can be reset by 

disconnecting and reconnecting the power 

supply. 
For additional descriptions on 

troubleshooting, see the install video at 

wilsonelectronics.com/DBPro4Gvideo

 .

Additional FAQ: 

What hours can I contact tech support? 

Technical Support can be reached 

from 7:00am to 6:00pm MST, by calling 

(866-294-1660), or by email, at tech@

wilsonelectronics.com.

How does weather affect the 

performance of my Outside Antenna?

Water vapor (e.g. rain, fog, snow or 

other precipitation) creates an effective 

filter to cellular signal. In times of 

heavy precipitation, you may see less 

performance.

What’s the difference between the 800 

MHz and the 1900 MHz bands? How do 

I know which MHz band my cell phone 

uses?

The DB Pro 4G works with all major 

North American cellular providers. 

Traditionally, 800/1900MHz are associated 

with voice and 3G data; while 700MHz 

and 1700/2100MHz are associated 

with 4G data. For more detail, refer to 

wirelessadvisor.com.

Kit 301121-40010 

• 50 Ohm Dome Antenna

• 10’ LMR400

Kit 311135-40060 

• 50 Ohm Wall Panel Antenna

• 60’ LMR400

Inside Antenna Kits

Kit 309900-50N

• 2 - Wall Panel antennas

• 1 - 50 ohm 3-Way Splitter

Kit 309905-50N

• 3 - Wall Panel Antennas 

• 3 - 2-Way 50 Ohm Splitters

Kit 309902-75F

• 2 - Wall Panel Antennas
• 1 - 3-Way 75Ohm Splitter

Kit 309903-75F

• 3 - Wall Panel Antennas

• 3 - 2-Way 75Ohm Splitters

Kit 309904-75F

• 1 - Wall Panel Antenna

• 1 - 2-Way 75 Ohm Splitter

Inside Antenna Expansion Kit 

Summary of Contents for DB Pro 4G













Reviews: