5
6
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
Installing a Wilson Electronics Signal Booster
Select a location to install the Signal Booster that is away from excessive heat, direct
sunlight, moisture and that has proper ventilation. Do not place the Signal Booster in an
air-tight enclosure.
Recommended installation locations for in-building Signal Boosters are:
In a closet, on a shelf and near a power outlet.
Run the Outside Antenna cable to the Signal Booster and attach it to the connector labeled
“Outside Antenna” on the Signal Booster. Run the Inside Antenna cable to the Signal
Booster and attach it to the connector labeled “Inside Antenna” on the Signal Booster.
Note: Be careful when plugging the connector in so as not to damage the center pins on
the connectors.
Connect the Outside Antenna to the Signal Booster with Wilson 400 low loss cable
(available from Wilson Electronics). Place the Inside Antenna in the center of the area
needing the amplified signal. It is important to have at least 50 feet of separation between
the Inside and Outside Antennas for the 50 dB Signal Boosters, 68 feet of separation
distance for the 60 dB PCS Signal Boosters and at least 75 feet of separation distance for
the 65 dB Signal Boosters.
AC/DC
Power Supply
Surge Protector Powerstrip
(recommended)
Signal Booster
Lightning
Surge Protector
(sold separately)
Cell
Site
Supports
Multiple
Users
Inside Antenna
Optional Dome
Antenna Shown
Point Yagi antenna
away from Inside
Antenna
Outside
Antenna
1900 MHz Yagi
Antenna Shown
50 feet minimum
separation between Inside
and Outside Antenna for
50 dB cellular Signal Booster
68 feet for 60 dB PCS
Signal Booster
75 feet for 65 dB cellular Signal Booster
Antenna Separation
Warning:
Connecting the Signal Booster directly to the cell phone with use of an
adapter will damage the cell phone.
Warning:
Lightning protection is recommended for all installations (sold separately).
Take extreme care to ensure that neither you nor the antenna comes near
any electric power lines.
