background image

Part #104100 AIG Wide Band Log Periodic Rev12 05.23.11

Antenna Specifications

Part Number

50 Ω   -  304411    •   75 Ω   -  304475

Frequency Range

700 -800

MHz

800-915 

MHz

915-1710 

MHz

1710-1850 

MHz

1850-1990 

MHz

1990-2700 

MHz

Gain

8.0 dBi

8.0 dBi

7.0 dBi

9.0 dBi

10.5 dBi

10.0 dBi

50 Ω VSWR avg.

1.6:1

1.4:1

1.3:1

1.2:1

1.2:1

1.2:1

75 Ω VSWR avg.

1.5:1

1.3:1

1.6:1

2.0:1

1.7:1

1.5:1

Horizontal Beamwidth

70° to 90°

Vertical Beamwidth

85° to 110°

F/B ratio

>20 dB

Nominal Impedance

50 Ω - 304411  •  75 Ω - 304475

Polarization

Vertical

Maximum Power

100 watts

Connector

50 Ω - N-Female   •   75 Ω - F-Female

Dimension

11.42” x 8.27” x 2.56” In

Weight

3.31 lbs

Temperature Range

-40° to 158° F

Rated Wind Velocity

134 MPH

Lightning Protection

DC grounded

30-Day Money-Back Guarantee

All Wilson Electronics products are protected by Wilson Electronics 30-day money-back 
guarantee.  If for any reason the performance of any product is not acceptable, simply return the 
product directly to the reseller with a dated proof of purchase.

90-Day Warranty

Wilson Electronics antennas are warranted for ninety (90) days against defects in workmanship 
and/or materials.  Warranty cases may be resolved by returning the product directly to the 
reseller with a dated proof of purchase. 

Antennas may also be returned directly to the manufacturer at the consumer’s expense, with 
a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by 
Wilson Electronics.  Wilson Electronics shall, at its option, either repair or replace the product. 
Wilson Electronics will pay for delivery of the repaired or replaced product back to the original 
consumer with in the continental U.S.

This warranty does not apply to any signal boosters determined by Wilson Electronics to have 
been subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or 
electronic properties.

RMA numbers may be obtained by phoning Technical Support at 866-294-1660.

3301 East Deseret Drive, St. George, UT 84790

For additional Technical Support visit  www.WilsonElectronics.com 

or email at: [email protected]

Phone: 866-294-1660    Local: 435-673-5021    Fax: 435-656-2432

www.twitter.com/WilsonCellular      www.facebook.com/WilsonCellular

Summary of Contents for 460103
























Reviews: