1
How It Works
Wilson Electronics Wide Band Log Periodic Directional Antenna will collect the cell tower
signal and send it through the cable to a signal booster, cell phone or cellular data card.
When the cell phone or cellular data card transmits, the signal is transferred to a signal
booster or directly to the antenna and broadcast back to the cell tower.
Package Contents
(A) Wide Band Log Periodic Directional Antenna & L Bracket, (B) 2 - U-Bolts, (C) 2 - Pipe
Brackets, (D) 4 - 1/4” Washers ,(E) 4 - 1/4” Split-Lock Washers, (F) 4 - 1/4”-20 nuts.
• 359933, 20” RG174 Cable with
FME male to MCX Connector.
• 951137, 30” RG58 Cable.
308412 additional kit contents:
A
B
E
C
F
D
1 – Install U-Bolt (
B
) on pole.
2 – Slide Pipe Clamp (
C
) over U-Bolt (
B
) Flat side away from pipe.
3 – Slide antenna bracket (
A
) onto U-Bolt (
B
) in desired location.
4 – Install Flat washer (
D
), split lock washer (
E
) and nut (
F
), tighten as appropriate.
Note:
Antenna may be installed on a variety of pipe angles, insure antenna is
pointing at cell tower and is vertical with the drip hole at the bottom.
Note:
A second U-Bolt assembly has been included to strengthen antenna mounting
in windy areas repeat steps 1 thru 4 to install.
Antenna Mounting Instructions
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
