RF Signal Detector Specifications
RF Signal Detector Specifications
Model Number
2E7501
Antenna connector
N-Type
Antenna impedance
50 ohms
Dimensions
5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm)
Weight
1.24 lbs
Maximum detectable in-band signal (dBm)
-38
Minimum detectable in-band signal with 1.5MHz BW (dBm)
-110
Minimum detectable in-band signal with 10MHz BW (dBm)
-105
Maximum recommended RF input (dBm)
-38
Power Requirements
110-240 V AC, 50-60 Hz, 4.2W or 6V DC, 700mA
3301
East Deseret Drive, St. George, UT 84790
For additional Technical Support visit www.WilsonElectronics.com
or email: [email protected]
Phone: 866-294-1660 Local: 435-673-5021 Fax: 435-656-2432
www.twitter.com/WilsonCellular www.facebook.com/WilsonCellular
111081_RF Signal Detector_Rev05_07.25.12
