9
10
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Mon.- Fri. Hours: 7 am to 6 pm MST.
Signal Booster
Signal Booster
Outdoor
Antenna
Outdoor
Antenna
Inside Panel
Antenna
Inside Panel
Antenna
Figure 1
Figure 2
CORRECT INSTALLATION
INCORRECT INSTALLATION
Never point antennas toward each other
Powering up a Wilson Electronics
Signal Booster
1 . Never point the front of a directional Outside Antenna toward the Inside
Antenna . See Figures 1 & 2 above .
2 . Ensure that both the Outside Antenna cable and the Inside Antenna
cable are connected to the Signal Booster
and the connections are
tight
before powering up the Signal Booster .
3 . Plug the power supply into the Signal Booster input marked “6V DC”
(carefully, to avoid damaging the center pin) and then into a surge
protected AC Power Strip .
4 . If the Signal Booster does not have green lights, please refer to pages
13 & 14 .
5 . Using multiple Signal Boosters in one installation could cause
interference to the cell tower .
6 . Contact Wilson Electronics Technical Support Team with any questions at
866-294-1660 or email tech@wilsonelectronics .com . Technical Support
hours are Mon .- Fri . 7 am to 6 pm MST .
Point antennas away from each other
