background image

English

Installation and operating instructions Wilo domestic water systems HiMulti3..H.. /HMHI/HWJ

21

1 General information

1.1 About this document

The language of the original operating instructions is 
German. All other languages of these instructions are 
translations of the original operating instructions. 
These installation and operating instructions are 
an integral part of the product. They must be kept 
readily available at the place where the product is 
installed. Strict adherence to these instructions is 
a precondition for the proper use and correct 
operation of the product.
These installation and operating instructions cor-
respond to the relevant version of the product and 
the underlying safety standards valid at the time 
of going to print.

1.2 EC declaration of conformity

A copy of the EC declaration of conformity is a 
component of these operating instructions. If a 
technical modification is made on the designs 
named there without our agreement or the decla-
rations made in the installation and operating 
instructions on product/personnel safety are not 
observed, this declaration loses its validity.

2 Safety

These operating instructions contain basic infor-
mation which must be adhered to during installa-
tion and operation. For this reason, these operating 
instructions must, without fail, be read by the serv-
ice technician and the responsible operator before 
installation and commissioning. It is not only the 
general safety instructions listed under this 
“Safety” section that must be adhered to but also 
the special safety instructions with danger symbols 
included under the following sections.

2.1 Symbols and signal words in the operating 

instructions

Symbols:
General danger symbol

Danger due to electrical voltage

NOTE: ...

Signal words:

DANGER!
Acutely dangerous situation.
Non-observance results in death or the most 
serious of injuries.

WARNING!
The user can suffer (serious) injuries. ‘Warning’ 
implies that (serious) injury to persons is proba-
ble if this information is disregarded.

CAUTION!
There is a risk of damaging the product/unit. 
‘Caution’ implies that damage to the product  
is likely if this information is disregarded.

NOTE:
Useful information on handling the product.  
It draws attention to possible problems.
Information that appears directly on the product, 
such as:

• Direction of rotation arrow,
• Identifiers for connections,
• Rating plate,
• Warning sticker,

must be strictly complied with and kept in legible 
condition.

2.2 Personnel qualifications

The installation, operating and maintenance per-
sonnel must have the appropriate qualifications for 
this work. Area of responsibility, terms of reference 
and monitoring of the personnel are to be ensured 
by the operator. If the personnel are not in posses-
sion of the necessary knowledge, they are to be 
trained and instructed. This can be accomplished, if 
necessary, by the manufacturer of the product at 
the request of the operator.

2.3 Danger in the event of non-observance of the 

safety instructions

Non-observance of the safety instructions can 
result in risk of injury to persons and damage to 
the environment and the product/unit. Non-
observance of the safety instructions results in 
the loss of any claims to damages.
In detail, non-observance can, for example, result 
in the following risks:

• Danger to persons due to electrical, mechanical 

and bacteriological factors

• Damage to the environment due to leakage of 

hazardous materials

• Property damage
• Failure of important product/unit functions
• Failure of required maintenance and repair procedures

2.4 Safety consciousness on the job

The safety instructions included in these installa-
tion and operating instructions, the existing 
national regulations for accident prevention 
together with any internal working, operating and 
safety regulations of the operator are to be com-
plied with.

2.5 Safety instructions for the operator

This appliance is not intended for use by persons 
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance 
by a person responsible for their safety. 
Children should be supervised to ensure that they 
do not play with the appliance.

Summary of Contents for Wilo-HiMulti 3 H Series






























Reviews: