Wilo PD-300EA-10M-AU Owner'S Manual Download Page 5

PRECAUTION BEFORE USING THE PUMP

- 5 -  

9.

Take care of handling the pump.  
Prohibit to impact the pump. 

 • Never carry the pump by the holding of cable itself. 

 • Care should be taken during installation that the pump 

is not allowed to be mounted suspended freely on the 

delivery pipe or on the cable. It must rest on a stabile 

surface and/or be suspended on a handle with a rope.

11.

 When connect or disconnect an electric power 

to the pump for service, installation and repair, 
it should be cut off the electric switch. 

 • Electric connections must be protected from moisture. 

10.

 The permitted voltage of this pump is ±10% of the rated voltage. 

Otherwise it will be the reason of shortening the service life of the pump.

6.

 Avoid operating under the condition of dry running and 

delivering no water. 

    For it will shorten the service life of pump and also 

cause the trouble of motor. 

 

7.

 Avoid using the pump nuder condition of hot water over 

40℃ For it will be shorten the service life of pump. 

 

8.

Be careful not to use the pump solvent such as benzol, 
acid, inflammable liquids such as gasoline.  
When it is used for them, there is the risk of the fire and 
it will cause the trouble of the pump and also shorten 
the service life of it. 

Gasoline

Alcohol

Summary of Contents for PD-300EA-10M-AU













Reviews: