Intended use
en
Installation and operating instructions Wilo-Smart IF-Modul Stratos, Wilo-Smart IF-Modul
27
CAUTION
Damage due to incorrect handling during transport and stor-
age!
Protect the device from moisture, frost and mechanical damage during transport
and temporary storage.
4
Intended use
ƒ
Smart IF modules are designed to externally control and signal the operating
status of Wilo pumps.
ƒ
Smart IF modules are
not
designed for safe deactivation of the pump.
DANGER
Risk of fatal electrical shock!
If used improperly, there is a risk of fatal injury due to electric shock!
• Never use the control inputs for safety functions.
• Never install the module in non-compatible devices.
4.1
Compatibility of the firmware
To ensure that all functions of the module are available, the following firmware ver-
sion must be installed on the product into which the module is installed:
Stratos Smart IF module
Pump
Version
Comments
Wilo-Stratos
≥ 5.09
Table 2:
Stratos Smart IF module firmware version
Smart IF module
NOTICE
The firmware version (SW) can be viewed via menu < 4.4.2.0 >.
Pump
Version
Comments
Wilo-TOP-E
Not compatible
Wilo-Stratos GIGA
≥ 1.00
Wilo-Stratos GIGA B
≥ 1.00
Summary of Contents for 2197102
Page 2: ......
Page 3: ...3 Deutsch 4 English 22 Fran ais 40 Espa ol 58 Italiano 77...
Page 98: ......
