WILMS 1251385, Operating Manual

Page: 5 / 20

Read carefully before starting your heater!
IMPORTANT NOTICE
This unit is a space heater with indirect heating, heat exchanger and exhaust.
The heater may not be set up near explosive or flamable materials and may not
be used in explosion or fire endangered rooms. It may also not be used in areas with
high dust development. The heater should be positioned at adequate distance to
flamable material such as wood etc. It is essential that there is a sufficient ventilation
of the room. The heater may not be worked on or transported during operation.
If the heater is used for drying of grain the set-up has to be in a right angle in front
of the radial fan or alternatively with sufficient distance. This has to be done so that
the function of the heater is not influenced by the immense suction of the radial fan.
The heater is
standard equipped with a fuel pre-heating device. This requires also
during the heating interruption (during the night, on weekends) tension so it remains
effective. Therefore leave the plug into the socket, switch to position "Heizen" (Heating)
and set the room thermostat to a low temperature (frost protection).
- 2 of 17 -