O p e r a t i n g - a n d I n s t a l l a t i o n M a n u a l B 3 8 0 - H a n s W i l m s G m b H & C o . K G
12. Environmental Protection and Recycling
The heater is made exclusively from high-quality materials, most of which are recyclable.
Dispose of packaging material
Dispose of the packaging material in accordance with the locally applicable
environmental regulations.
Disposal of waste electrical and electronic equipment (WEEE)
For customers in EU countries
This device is subject to the European Directive 2012/19/EC on Waste Electrical and Electronic Equipment
(WEEE) and the corresponding national laws. The WEEE directive provides the framework for an EU-wide
treatment of waste electrical equipment.
The device is marked with the symbol of a crossed-out waste bin. This means that you must
not dispose of it with normal household waste, but rather dispose of it in an environmentally
friendly manner in a separate collection.
This device is intended as a professional electrical tool for exclusively commercial use (so-called B2B device
according to the WEEE Directive). In contrast to devices predominantly used in private households (so-called
B2C devices), this device may therefore not be handed over to the collection points of the public waste
disposal providers (e.g. municipal recycling centres) in some EU countries, e.g. in Germany. In case of doubt,
please inform yourself at your point of sale about the prescribed disposal route for B2B electrical appliances
in your country and ensure disposal in accordance with the applicable legal regulations. Please also note
any information on this in the purchase contract or in the general terms and conditions of your point of sale.
Proper disposal of this device avoids negative effects on people and the environment, serves the targeted
treatment of pollutants and enables the reuse of valuable raw materials.
Note: The electronic components are subject to special regulations for disposal.
Help protect the environment by ensuring that your old device is only disposed off in an
environmental-acceptable way!
13. Possible Faults and Solving
Fault
Cause
Remedy
Device plugged-in, power button
on "I", device does not start
No mains voltage available
Check socket/extension/cable
drum
When using a room thermostat,
the temperature in the room is
higher than the set temperature
Setting room thermostat to higher
temperature
Power supply or power button
defective
Check by customer service
Bridge plug of the thermostat
socket not plugged in
Attaching the bridge plug
Control indicates fault
Determine and eliminate the
cause, suppress control
Page 9 of 15
