Wilmont Grinder Assembly Manual – TAG 101
2
Step three:
Install the red
Tracking Wheel
using the included
½-13 x 3” inch Hex Bolt
. Placement of the 5ea -
½ Washers
is crucial to proper tracking. 1 Washers go under the head of the Hex Bolt, as seen in Photo 4, and
4 between the Tracking Wheel and the Grinder, as seen in Photo 5. Tighten the
Bolt
with a ¾ wrench.
Step four:
Thread the
Tapered Handle
onto the left
side of the
Pivoting Arm
and lock it down with the
Acorn Nut
using a 5/8 wrench. Photo 6 shows the
proper installation of this
Handle
.
Step five
: Thread the four star
5/8-16 Tracking Control
Knob
(spring & washer) into the upper portion of the
Pivoting Arm,
bottom hole, until you contact the hinged
Tracking Plate
. Continue threading in until this
Plate
is
parallel with the sides of your Wilmont Grinder. See
Photo 7.
Photo 4 – Tracking Wheel
Photo 5 – Tracking Wheel & Washer placement
Photo 6 – Tapered Handle
Photo 7 – Tracking Control Knob
