AX2 LED SERIES INSTALLATION INSTRUCTIONS
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065
Page 3 of 3
PN 49090150
ROW ASSEMBLY
Power Feed Hardware:
Each power feed hardware kit includes the following:
(1) Assembly & Installation Instructions
(2) T-bar mounting brackets & 1/ 4” - 20 studs
(1) 5” diameter canopy with retaining screw
(1) 2” diameter canopy
(2) Suspension cables with hardware
(2) 10” - 32 flange nuts with serrations
(1) Strain relief bushing
(5) Cable ties (white plastic)
Joiner/End Fixture Hardware:
(1) Assembly & installation instructions
(1) AX2 center suspension bracket
(2) Row aligner channel/ AX2 (side btm)
(1) Row aligner channel/ AX2 (bottom)
(2) Screw, SS hex 1/4”x14 1” long
Each non-power feed hardware kit includes the following:
(1) T-bar mounting bracket & 1/ 4” - 20 stud
(1) 2” diameter canopy with 1/4” diameter
(1) Suspension cable with hardware
(1) 10 - 32 flange nuts with serrations
(1) #8 x 3/8” hex head screw
Step 1:
For T-bar ceiling, install mounting brackets at desired
locations (see stand-alone assembly step 1 & 2).
Step 2:
Install mounting cables at desired locations. Only the first
fixture in each row will require two suspension cables. Each
adjoining fixture will require only one cable before attaching to
the previous fixture. (Fig. 7).
Note
: For safety - Always support the weight of the fixture.
Do not leave a fixture hanging by only one end while
working.
2” canopy
The 5” canopy
is used for
power feed.
Fig. 7
Step 3:
To remove lens, insert a putty knife or flat blade screwdriver
between the lens and channel. Pry up to get the lens
loosened and then gently peel the lens up.
Step 4:
For continuous row applications, use Row Aligners (installed
in fixtures) for level and adjustment.
Row aligner
Row
aligner
slot
AX2U
AX2D
Step 5:
When row mounting fixtures, joint between fixtures will have
continuous row bracket. After connecting quick connects
and fixtures, add continuous row bracket around fixture by
snapping the bracket into place.
Continuous
row bracket
Step 6:
Add center suspension bracket to fixtures..
Center
Suspension
Bracket
Continuous
row
bracket
Suspension
Cable Mount
