96 & 97 LED SERIES INSTALLATION INSTRUCTIONS
H.E. Williams, Inc. Car thage, Missouri w w w.hew.com 417-35 8 - 4 0 65
Page 2 of 2
PN 49090174
INSTALLATION
Step 1:
Securely attach mounting brackets (2) to mounting surface.
The 96/97 enclosure will engage the mounting brackets
at any point along its length, except for where there are
latches. Required spacing between the brackets are as
follows: 12” - 17” for 2’ housings, 30” - 42” for 4’ housings,
and 48”- 80” for 8’ housings.
Step 2:
Insert one side of the 96/97 housing into the mounting
brackets.
Step 3:
Push up on the enclosure and then press in on the
mounting bracket until the mounting bracket clicks into
place.
Step 4:
Verify that the enclosure is fully supported before
connecting to a power supply.
