background image

3

WIR TX75 Two-Channel Infrared Transmitter

MAN 166C

Important Safety Instructions 

Please read and keep these instructions.

CAT-5e CABLE SAFETY

CAUTION!

Do NOT plug the WIR TX75 (master) CAT-5e / RJ45 cable into anything other than the WIR TX75-S slave(s). The TX75 
CAT-5e / RJ45 connection is proprietary and is NOT compatible with ethernet or any other RJ45 systems. Failure to 
comply with this caution can destroy this or other equipment and will void the warranty.

Receiver Safety Warnings

HEARING SAFETY 

CAUTION!

Many Williams Sound receivers are designed to amplify sounds to a high volume level, which could potentially cause hearing 
damage if used improperly. To protect your hearing and the hearing of others:

1.  Make sure the volume is turned down before putting on the earphone or headphone—only then adjust the volume to a 

comfortable level. 

2.  Set the volume level at the minimum setting that you need to hear. 

3.  If you experience feedback (a squealing or howling sound), reduce the volume setting and move the microphone away from the 

earphone or headphone. 

4.  Do not allow children or other unauthorized persons access to this product. 

BATTERY SAFETY AND DISPOSAL 

CAUTION!

Williams Sound receivers are supplied with non-rechargeable alkaline batteries. Do not attempt to recharge non-rechargeable 
batteries; they may explode, release dangerous chemicals, cause burns, or cause other serious harm to the user or product.

PACEMAKER SAFETY 

CAUTION!

If you have a pacemaker or other medical device, make sure that you are using the Williams Sound receiver in accordance with 
safety guidelines established by your physician or the pacemaker/medical device manufacturer.

Transmitter Safety Warnings

WARNING! To reduce the risk of fire or electric shock, do not expose the system to rain or moisture. Do not use this 
apparatus near water. The system should not be exposed to dripping or splashing, and objects filled with liquids such 
as beverages should not be placed on the transmitter or receivers. Clean only with a dry cloth.

CAUTION

RISK OF ELECTRICAL SHOCK — DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE COVER (OR SIDES). NO USER-SERVICABLE 
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

!

AVIS

RIQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR

ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE ÉLECTRIQUE, NE 

RETIREZ PAS LE COUVERCLE (OU CÔTÉS). IL NE SE TROUVE AL’INTÉRIEUR 

AUCUNE PIECE POUVANT ETRE RÉPARÉE PAR L’USAGER. S’A DRESSER A 

UN RÉPARATEUR COMPÉTENT.

!

Summary of Contents for TX75/b

















Reviews: