background image

IWIR TX925, WIR SYS 1 Infrared Listening Systems

12

Receiver Safety Information

HEARING SAFETY

CAUTION!

This product is designed to amplify sounds to a high volume level which could potentially cause hearing damage if 

used improperly. To protect your hearing and the hearing of others:

3.   Turn the volume down before putting on the earphone or headphone, and then adjust the volume to a 

comfortable level.

4.   Set the volume level at the minimum setting that you need to hear.

5.   If you experience feedback (a squealing or howling sound), reduce the volume setting and move the microphone 

away from the earphone or headphone.

6.  Do not allow children or other unauthorized persons to have access to this product.

BATTERY SAFETY

CAUTION!

This product is supplied with disposable Alkaline batteries. Do not attempt to recharge disposable batteries, which 

may explode, release dangerous chemicals, cause burns, or other serious harm to the user or product.

MEDICAL DEVICE SAFETY

CAUTION!

1.  Before using this product with an implantable or other medical device, consult your physician or the manufacturer 

of your implantable or other medical device.

2.   If you have a pacemaker or other medical device, make sure that you are using this product in accordance with 

safety guidelines established by your physician or the implantable device manufacturer.

Recycling Instructions

Battery Safety and Disposal

Help Williams AV protect the environment! Please take time to dispose of your equipment properly. 

Please do NOT dispose of batteries in the household trash. Please take the batteries to a retail or 

community collection point for recycling.

Product Recycling: 

Please do NOT dispose of your Williams AV equipment in the household trash. Please take the 

equipment to an electronics recycling center or return the product to the factory for proper disposal.

Summary of Contents for Infrared Receiver WIR RX22-4

















Reviews: