![Williams-Sonoma Open Kitchen Hot Air Popcorn Maker User Manual Download Page 6](http://html1.mh-extra.com/html/williams-sonoma/open-kitchen-hot-air-popcorn-maker/open-kitchen-hot-air-popcorn-maker_user-manual_982550006.webp)
6
FOR ADDITIONAL BATCHES
For additional batches, unplug unit. Make sure the popping chamber is empty. Carefully remove excess
popcorn or any unpopped kernels.
Allow 15 minutes of cooling time between cooking additional batches of popcorn.
Then repeat previous steps.
CAUTIONS
This is a hot air appliance. Never add oils, fats, shortening, sugar or salt to the popping chamber.
Use with regular or premium hot air popcorn; do not use microwave popcorn in this machine.
Always use fresh hot air popcorn kernels; stale or dried-out kernels pop poorly and may cause scorching
or smoking.
It is not necessary to preheat this appliance.
Never leave unit unattended while in use. Never operate unit when empty.
Always keep lid on base until all popping is complete. Unplug unit before removing the lid.
Occasionally, a hot, unpopped kernel may be thrown from the chute. To avoid any contact with hot
kernels, keep face and hands away from the chute. Keep children away from the unit.
Use oven mitts or potholders when handling hot surfaces.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it
yourself. Contact a qualified appliance repair technician if the product requires servicing.
CARE AND CLEANING INSTRUCTIONS
Unplug and allow unit to cool at least 10 to 15 minutes before cleaning.
Wash lid and measuring cap/butter tray in warm, soapy water. Rinse and dry thoroughly.
CAUTION:
Do not wash in dishwasher.
Wipe the base, including the popping chamber, with a soft, dry cloth.
Never immerse the appliance base in water or other liquid.
Do not scour surfaces with steel wool or abrasive cleaners.
STORING INSTRUCTIONS
Unplug unit and allow to cool.
Store fully assembled with lid in place.
Store in its box or in a clean, dry place.
Never wrap cord tightly around the appliance. Do not put any stress on cord where it enters unit,
as this could cause cord to fray and break.