Date: 15-Sept-17
Page 3 of 5
Rev:
Assembly Instruction Steps:
1. Carefully turn the Table Top (A) upside down on a carpet or scratch-free surface.
2. Un-assemble Legs (C) from Particle Board by taking out the
8
Bolts using Allen Wrench. (See
Fig. 1
).
3. Attach one Leg (C) to Table Top (A) using Bolts (D), Spring Washers (E) and Flat Washers (F). Tighten with Allen
Wrench
(See
Fig. 2
). Repeat this operation for the remaining Leg (C).
4. Tighten all Bolts securely with Allen Wrench, but do not over tighten the Bolts.
5. Turn the assembled Table to its upright position. Assembly is complete.
Fig.1
Fig.2
D x 12pcs
E x 12pcs
F x 12pcs
Adjusting Levelers
