Date:
www.williams-sonoma.com
Page 3 of 5
Rev:
1.
Carefully open the container removing all boxes and packing material.
2.
Stand the headboard upright against the wall.
3.
Insert threaded rod through each insert nut hole in the lower leg of the head board.
4.
Connect the side rails to the head board by using its dowel locator inserting threaded rod to the pre bore
holes on the side rails followed by a curved washer w/ hexagonal bolt. Tighten using wrench until head
board is held firmly.
5.
Do the same on the other side rail.
6.
Repeat same process with the headboard to connect foot board to the side rails.
