Date: 9‐Jan‐14
www.williams‐sonoma.com
Page 3 of 5
Rev:
PROFESSIONAL INSTALLATION REQUIRED - Contractor and Plumber needed for Installation.
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Keep all parts out of the reach of children.
Note
: The Marble top is fragile. In order to preserve its integrity, it is important to limit the amount of handling it gets.
Due to the nature of this natural material, slight chipping or cracking may result with excessive handling or if placed
on a hard surface.
The Marble top, even when it is still packed, should never lie flat, except for when it is placed on top of the console or
during unpacking. Please note that arrows on the package indicate the side to be placed up while storing.
Marble should be unpacked with extreme care. Once unpacked, the marble top should be placed directly on top of
the Base. If placing down, marble top should only be placed on its end and on a very soft, cushioned surface such as
a rug or thick toweling.
Parts Included:
(A) Marble top 1x
(B) Base 1x
Hardware Included:
(C)
Bolt
Dia. 6 x 25mm
(D)
Allen
Wrench
(E)
Metal Pin
(F)
Wood Screw
Dia 8 x 4 x 15mm
(G)
Towel Rail
2x 1x 2x
12x
2x
Tools Required (Not Included):
Flat Head Screwdriver Phillips Head Screwdriver
A
B
