background image

6

WaveCAST C

A Wi-Fi network is required for streaming to devices

The WaveCAST C unit does not provide Wi-Fi on it's own.  If streaming audio is desired, a Wi-Fi Network is 
required, for the device to receive streaming audio from the WaveCAST C.  The Wi-Fi network will need to be 
established before the streaming feature can be used.  The WaveCAST C is connected to a hard-wired ethernet 
network containing a Wi-Fi access point (or a router with Wi-Fi).  Audio is streamed out of the RJ-45 ethernet jack 
over the network and through the access point, to the end device.  This ethernet jack, labelled "Streaming Audio 
Out", is shown on page 6.

Router and Network Equipment Selection

The WaveCAST C is intended to be set up on an already existing Wi-Fi network; however, upgrades to your 
network equipment may be necessary depending on the performance desired from the WaveCAST C. For 
instance, a higher-end, more powerful router will allow more users to connect to your audio stream than using a 
cheaper, less powerful router. 
The Wi-Fi network will need to be accessible to the users who will be listening to the audio. If the user's devices 
cannot connect to the network due to security settings, they will not be able to hear the audio.
The WaveCAST C system will put a demand on the network. If the network cannot handle the demand, whether 
because it is being used for other networking needs or because the networking hardware is not strong enough, 
the WaveCAST C will be unable to reach its maximum audience, and there may be performance issue, such as 
dropout or "breaks" in the audio.
When streaming to a small or medium sized audience, a basic networking configuration may suffice. When 
streaming music using multiple channels (such as having several WaveCAST units on your network), a powerful 
router and network configuration is more likely to be required. 
The 

WaveCAST Networking Guide 

is available on the Williams AV website for additional networking tips. The 

WaveCAST networking guide applies to the WaveCAST C as well as other WaveCAST products.

Wiring and Connections

 

Summary of Contents for WaveCAST C





























Reviews: