background image

MAN 133D

SoundPlus

 Infrared Listening System

    ©2012 Williams Sound • All Rights Reserved

10300 Valley View Rd • Eden Prairie, MN 55344
800-328-6190 / 952-943-2252 • FAX: 952-943-2174
www.williamssound.com

Configuration Settings

The diagram below (Figure 4) illustrates how to configure your system using the switch settings (Figure 5) on the back of the MOD 
232 Modulator. This diagram is also printed on top of the MOD 232 Modulator for quick reference. 

A250

Figure 4: DIP Switch Configuration Chart

CHANNEL A AND B
CONFIGUREATION
SWITCHES

A252

Figure 5: 

Configuration Switches on Back of MOD 232.

Summary of Contents for SoundPlus WIR TX925

Page 1: ...VAC CE TFP 027 POWER IN 120 AVC US TFP 010 230 VAC CE TFP 027 Figure 1 Typical 2 channel configuration when using the MOD 232 Modulator TX9 Emitter and optional RX22 4 Receiver Refer to installation manual for detailed descriptions and set up procedures Modulator Set Up 1 Position the MOD 232 Modulator near the sound system or mixer from which it will receive audio 2 Connect the power supply to th...

Page 2: ...r coverage See Figure 1 RX22 4 Receiver Set up The RX22 4 comes standard with 2 AA alkaline batteries 1 Plug in an earphone or headphone in the jack on top of the unit 2 Rotate the receiver on off volume switch to turn the receiver on A red on indicator will illuminate on top of the unit Adjust the volume control to a comfortable listening level 3 Turn the channel selector knob on the top of the u...

Page 3: ...mum 200 ft 70m maximum length 18 ga Use 50 Ohm Coaxial Cable RG58 Use RG58 Coax 1000 ft 350m max length www williamssound com In Out Out 50 Ohms Baseband Modulation Mounting Bracket RoHS Class 1 LED Product Williams Sound Minneapolis Minnesota USA Patent Pending AUDIO OUTPUT POWER ON INDICATOR BASEBAND OUTPUT BASEBAND INPUT BASEBAND OUTPUT BASEBAND INPUT POWER IN 120 AVC US TFP 010 230 VAC CE TFP ...

Page 4: ... com Configuration Settings The diagram below Figure 4 illustrates how to configure your system using the switch settings Figure 5 on the back of the MOD 232 Modulator This diagram is also printed on top of the MOD 232 Modulator for quick reference A250 Figure 4 DIP Switch Configuration Chart CHANNEL A AND B CONFIGUREATION SWITCHES A252 Figure 5 Configuration Switches on Back of MOD 232 ...

Reviews: