N
IGHT
S
CAN
S
POT
O
PERATOR
’
S
M
ANUAL
4
TP-5590101-00
June 2019
8. Secure the Remote Control Holder in position using both mounting holes with customer-
provided stainless steel hardware. The mounting hardware must include proper means
to resist vibration loosening such as thread-locking compound or locking hardware.
Torque all hardware as appropriate for its size and grade.
Section 3
Operation
The Remote Control is used to operate the Night Scan Spot as shown in Table 2 and Figure 2.
Table 2 Button Function
Symbol
Function
Symbol
Function
ON/OFF.
Press to toggle power the light
on and off. Turning the light off disables all
other button function.
Warning Signal.
Press to toggle the
Warning Signal on and off. When on, the
light alternates between flashing 3 long
flashes and 3 short flashes.
Up Arrow.
Press and hold to raise the light
beam. The light will rotate upward to a
maximum of 70°.
Down Arrow.
Press and hold to lower the
light beam. The light will rotate downward
to a maximum of 45°.
Left Arrow.
Press and hold to pan left.
Right Arrow.
Press and hold to pan right.
Figure 2 Remote Control
ON/OFF
Down Arrow
Right Arrow
Left Arrow
UP Arrow
Warning Signal
Indicator
