4
Once the activity is complete select
“stop activity”,
then save and complete the data for the activity (name, description of
the route, etc...).
To see all the features that can be accessed using the eBikeMotion app we recommend reading the User Manual for the
APP, which can be downloaded from the product page on the Wilier Triestina website
https://www.wilier.com/global/cento1-hybrid
WARNINGS
•
Should the battery require maintenance or need to be replaced refer to your trusted dealer.
•
We recommend exclusively using 8 mm screws to attach a bottle to the down tube of your Cento1 Hybrid. The
use of longer screws may jeopardise the integrity of the battery. Screws used to fix the battery to the down tube
must also be no longer than 8 mm; use washers to adjust the length.
•
We advise against cleaning the Cento1 Hybrid with equipment that sprays water at high pressures, as this may
jeopardise the electrical devices present. Be sure that the plug for the charging socket is hermetically sealed when
washing. When the Cento1 Hybrid is attached externally to a car or camper for transportation, protect the bike
and electronic components with the appropriate protective covers. Avoid exposing the iWoc button to dust or
water.
•
Battery autonomy depends on how the bike is used. Given normal use, the bike can travel an estimated 100 km
with a maximum incline of 1500 m. The battery requires an estimated three and a half hours to charge fully.
•
If boring holes, follow the visual instructions provided in the Quick Guide Connection & Mount, X35 system.
•
Components for the Cento1 Hybrid are paired with the frame number. If a component is replaced, it must once
again be paired with the frame using software available at technical service centres and authorised Wilier shops.
Refer to one of these locations to complete the replacement of the component. Do not disassemble or alter the
product, use the Cento1 Hybrid in compliance with local laws and regulations.
•
For more detailed information regarding the use and maintenance of your Cento1 Hybrid, we recommend
reading the user manual, downloadable at:
https://www.wilier.com/it/after-sale-support
IMPORTANT NOTES
•
Do not deform, modify or disassemble the batter to avoid triggering leaks, overheating or explosion of the
battery. If any liquid that has leaked from the battery comes into contact with your eyes, immediately rinse the
affected area with fresh water without rubbing your eyes and immediately consult a physician.
•
Do not leave the battery near sources of heat.
•
Do not subject the battery to strong shocks, do not place the battery in water and never allow the terminal to
get wet.
•
To charge the internal battery, use the eBikeMotion charger that was provided when you bought the bike. Do
not connect the plug in wet conditions. If any water comes out of the plug, dry carefully before connecting. If
the battery fails to charge completely after charging for 6 hours, immediately disconnect the plug to stop
charging the battery and contact an authorised Wilier Triestina centre.
•
Charge the battery in locations that are sheltered from the weather.
