4
1)
Options / model variants
Original instructions
UNITOR HPC 54/1 67/1
Symbols used to mark
instructions
1 Important safety instructions
For your own safety
The high-pressure cleaner may
only be used by persons in-
structed in its use and who have
been expressly authorised to do
so.
Although extremely easy to op-
erate, children should not be al-
lowed to use the cleaner.
General
Use of the high-pressure clean-
er is subject to the applicable lo-
cal regulations.
Besides the operating instruc-
tions and the binding accident
prevention regulations valid in
the country of use, observe rec-
ognised regulations for safety
and proper use.
Do not use any unsafe work
techniques.
Transport
Transport of the high-pressure
cleaner is easy on its large
wheels.
For safe transport in and on ve-
hicles we recommend to prevent
the equipment from sliding and
tilting by fixing it with belts.
For transport at temperatures
around or below 0°C, anti-freeze
should be drawn into the pump
beforehand (see chapter 6).
Before starting the cleaner
If your 3-phase cleaner was
supplied without a plug, have
it fitted with a suitable 3-phase
plug with earth conductor, by an
electrician.
Before use, check that the high-
pressure cleaner is safe and in
proper condition.
Regularly check whether the
power cord is damaged or
shows signs of ageing.
Use the high-pressure cleaner
only when the mains power lead
is in a safe condition. (risk of
electric shock if damaged!).
Check the rated voltage of the
high-pressure cleaner before
connecting it to the mains power
supply. Ensure that the voltage
shown on the rating plate corre-
sponds to the voltage of the lo-
cal mains power supply.
We strongly recommend that the
power supply to the high pres-
sure cleaner be connected via a
residual current circuit breaker.
This device stops the supply of
electricity if the leakage current
to earth exceeds 30 mA for 30
ms or it has an earth tester cir-
cuit.
Operate the cleaner only in an
upright position!
Please observe the regulations
and provisions applicable in
your country. Before putting the
high-pressure cleaner into ser-
vice, carry out a visual check of
all the major components.
Safety instructions in these
operating instructions which
must be observed to prevent
risks to persons are marked with
this danger symbol.
Before starting up your high-
pressure washer for the first
time, this instruction manual
must be read through carefully.
Save the instructions for later
use.
This indicates tips and instruc-
tions to simplify work and to en-
sure safe operation.
This symbol is used to mark
safety instructions that must be
observed to prevent damage
to the machine and its perfor-
mance.
