18
1)
Options / model variants
Original instructions
UNITOR HPC 54/1 67/1
5.2 Some typical cleaning tasks
Task
Accessories
Method
Cleaning of
walls, floors and
equipment.
Detergents
Injectors
Foam lance
Powerspeed lance
Floor Cleaner
l
1. Soaking – apply foam to all surfaces (bottom to top)
and wait for approx. 10 - 30 minutes.
2. Remove the dirt from surfaces with the high
pressure lance or chosen accessory. Again, clean
from bottom to top on vertical surfaces.
3. To flush away large quantities of dirt, change to low
pressure mode and use the higher flow to push
away the dirt.
4. Use recommended disinfectant products and
methods to ensure hygiene. Apply
disinfectant once the surfaces are perfectly clean.
Machinery
Detergent injection
Powerspeed lances
Curved lances and
underchassis washers
Brushes
1. Apply detergent to vehicle or equipment surfaces in
order to soften up dirt and grime. Apply from bottom
to top.
2. Proceed with cleaning using the high pressure
lance. Clean again from bottom to top. Use
accessories to clean in difficult to reach places.
3. Clean fragile areas such as motors, rubber at lower
pressure levels to avoid damage.
5.2.2
Task
Accessories
Method
